Cost Effective

Rendering is the process of covering an exterior wall of a building with a layer of wet material that dries to form a protective layer. Exposed stone and and brick work is prone to erosion when left open to the elements. Rendering is a cost effective solution to counteracting the effect of the elements and protecting most types of masonry from moisture and the cold weather.

Grown In Popularity

Render is traditionally composed from a sand and cement mix. However, with advances in technology and changes in style and taste, different coloured render products such as through coloured render have grown in popularity.

What is Through Coloured Render?

Through coloured render is a sand, cement and lime based type of render containing White Portland cement with an added pigment, to give it its colour.

No Need For Painting

Its name refers to the fact that the pigment, and therefore the colour, runs throughout the material. The render mix itself is already coloured with the colour permeating all the way through. Unlike traditional sand and cement render mixes, there is no need to for it to be painted.

Colored render is a recent and popular development for several reasons.

Here are our top three reasons to use it on your next project:

Three Reasons Why You Should Consider Through Coloured Render On Your Next Building Project

1. Aesthetics

Firstly, this type of decorative render is aesthetically pleasing. A wide range of colour variations can be achieved as can a number of different finishes. Through coloured render can be scraped, scraped with Ashlar cuts, stone or textured.​​​​​​​ It’s an increasingly popular finish on modern house builds, such as in the image below showing cream render applied to the house on the left:

​​​​​​​​​​​​​​

We recently applied some stunning Sto render.

2. Ease of Application

Through coloured render is supplied ready mixed and can be applied in a one coat finish. It can be applied to almost any type of masonry. Whilst the material costs of through coloured render can be higher than traditional sand and cement, its much lower associated labour and ongoing maintenance costs make it a very cost effective solution. Coloured render is virtually maintenance free and usually guaranteed for ten years by the manufacturers.

Cement and sand render is more labour intensive as there are more stages in the application process. It is normally mixed on site and requires 2-3 coats of application. First, one to two base coats need to be applied. Each of these are scored whilst still wet so that subsequent coats can adhere to them. A top layer is applied more thinly and given a shiny finish, ready for painting. In order to protect it and make it weather tight, traditional render has to be painted with a finishing coat of a proprietary external masonry paint.

3. Durability

The formulations of through coloured render tend to be have improved durability properties than traditional sand and cement. Whilst it is cheap on materials, sand and cement has a tendency to crack if the underlying structure moves.

Through coloured renders tend to have additional components added to their mix which improve their hardiness. Polymers or Acrylics are common additions. These increase the flexibility and extend the life of the render by making it less prone to cracking and, in some cases, making it self cleaning too.

Monocouche Renders

Monocouche Renders are a type of through coloured render originating in Europe that has become very popular in the UK. The white cement mix of Monocouche Renders is pre-coloured to a shade of your choice. Not only do they provide a decorative finish as well as a weatherproofing layer, they have an additive that makes them more flexible to help eliminate cracking. They can also be self-cleaning.

Sto is one such manufacturer of this type of render. As part of our work as drylining contractors for the University of Birmingham’s new Sport Centre, we applied stunning Sto render.

Full Range Of Colours Available

Whatever type of render you prefer for your project, we have the skills and materials to provide it for you. We have a full range of colours from an extensive selection of manufacturers. If you’re unsure, we can help advise you. With our renowned quality and expertise, you can rest assured you’re in safe hands when you use Taylor Hart Limited.

Call Us

If you would like to enquire about our rendering services, please call us on 01676 522422 or via our contact page.

You may also like to read our previous blog on ceiling installation companies Birmingham.

The post 3 Reasons To Consider Using Through Coloured Render Over Traditional Sand and Cement On Your Next Building Project appeared first on Taylor Hart Limited.

Coloured render mix is also very popular, particularly throughout Bristol and new build apartments, and provides a bright, weather-resistant, one-coat wash of colour. Coloured render products are both cost-effective and virtually maintenance-free as the coloured finish can last up to ten years, if applied correctly by trained rendering contractors.

Is Rendering a DIY Job? | Do I Need Rendering Contractors?

In theory, rendering can be a DIY job depending on the results you want to achieve. To achieve the flawless smooth finish you see on most new builds, then you’re going to need professional rendering contractors as they know which composition of cement, fine sand and lime makes the render a creamy texture you need for the texture you desire. You also need bonding agents, colour pigments and drying additives so it’s best to leave it to the pros if you’re planning a large project! However, if you’re just experimenting at home then you can buy acrylic pre-mixed render which can be applied to a wider variety of surfaces and often with easy-to-use spray equipment.

Here at Taylor Hart, you can leave this all to us. We are equipped with highly trained expert rendering contractors, state of the art equipment and materials and a renowned status for excellent customer satisfaction. We guarantee competitive rates and flexible call out times that suit you.

As one of the leading teams of rendering contractors Birmingham has to offer, we pride ourselves on providing a comprehensive array of services to meet all of your construction needs. This includes installing glass reinforced gypsum, mineral fibre ceilings and even stylish metal ceilings to give your commercial space a bright, professional and sleek finish. We also offer a range of plastering, fire protection and screeding services to get your property up and running as soon as possible.

So for the most highly trained team in town, give Taylor Hart a call today on 01676 522422 .

You might also like to read our previous blog post on how we are leading UK dry lining contractors.

The post Rendering Contractors – Where To Find The UK’s Best appeared first on Taylor Hart Limited.

Taylor Hart – rendering contractors in Birmingham, are your first port of call for your coloured rendering requirements. Coloured rendering is a new and popular development in the rendering industry. We have a full range of colours available from a selection of manufacturers, as well as an extensive variety of finishes including scraped, scraped with Ashlar cuts, stone or textured. This ensures that whatever style you want to achieve we can help you fulfil your wishes and we always aim to exceed your expectations.

Rendering provides a very cost-efficient solution in two ways. It is a one-coat finish, meaning that the time to apply the render is reduced, therefore cutting costs. It is also virtually maintenance free, which means that you are not stuck with expensive annual costs in maintaining the exterior of your property.

Taylor Hart – Rendering Contractors in Birmingham for all your rendering needs

When you use Taylor Hart’s rendering contractors in Birmingham you can rest assured that we will listen to you. If the modern coloured render is not to your liking, we can offer the more traditional sand and cement render. We are happy to take the time to discuss exactly what you want from your rendering project so that you get the results you’re looking for.

We are renowned for our expertise in rendering in Birmingham and surrounding areas. We take the time to ensure that we keep up to date with the latest developments in construction, and we invest in training our employees so that they are the very best rendering contractors available. We pride ourselves on delivering a first class service to all our clients, no matter the scale. We ensure that all our rendering projects are completed on time and in budget.

To discuss your requirements from Taylor Hart, your rendering contractors in Birmingham and how we can help you to achieve the perfect outcome with your commercial building project or home based project, please contact us today. You can request further information, a free project estimate, or arrange a consultant call or visit. Please call 01676 522422 or visit our website at www.taylorhart.co.uk. Alternatively, you can take a look at our last blog update on our innovative designs at Taylor Hart Ltd.

The post The Best Rendering Contractors in Birmingham appeared first on Taylor Hart Limited.

Render is applied to buildings for a variety of reasons and coloured rendering is a more recent and popular addition to the rendering range of products.  Given that render can be applied to different types of masonry, coloured rendering is often used not only on new, modern buildings, but on older, more traditional buildings where masonry has become old and tired, or where different bricks have been used, for extensions, for instance.

As a silicon resin-based product, coloured rendering has the added functional benefits of reducing dirt and cracking, whilst sealing surfaces from external weathering, water ingress and drafts.

Taylor Hart supplies one coat finish coloured rendering products, which are ready mixed and provide a protective layer, offering a weather resistant barrier to the finished surface.  With its ease of application, a single layer is approx. 15mm thick, requiring less time to apply, thus reducing on site labour costs.  Future maintenance is minimal and because the product is through coloured, with the average life of about 25 years, there is little or no requirement to regularly repaint.  Coloured rendering contains additives which help to reduce cracking and many types of render are self-cleaning and scratch resistant.  With vast experience in both the commercial and domestic sectors, we are confident in the quality of our products, which are supplied with a 10 year manufacturer’s guarantee.

With a vast range of colours and textures to choose from, the overall exterior appearance of a property can be vastly improved, whilst remaining in-keeping with the surrounding buildings and location.  Our service includes colour matching and where appropriate, advice on alternative, traditional forms of sand and cement render which we can also supply, either ready mixed or mixed on site.

Call our expert team today on 01676 522422 to discuss your project; we are happy to answer any queries that you may have with regard to coloured rendering.  Visit our website at www.taylorhart.co.uk to see our full range of products and services, including plastering and screeding. You can also visit out previous blog update on Fire Protection Services for more information on what Taylor Hart has to offer.

We look forward to working with you; our team are waiting for your call and are confident that you will find the quality of product and attention to detail second to none.

The post Coloured Rendering -The Beauty of it appeared first on Taylor Hart Limited.

Rendering Contractors Birmingham – Coloured rendering

So why not look at coloured rendering for your commercial property? This is a recent – and extremely popular – form of rendering, and it can help transform the exterior of a building. One big advantage of coloured render is that it can be applied to most types of masonry, and it is simply a one coat finish – supplied already mixed. It is extremely durable and weather resistant, and as it lasts so long, it is a cost-effective way of rendering your property. It is quick to carry out, and once done, it is virtually maintenance free. The finish is decorative, and the best part is that it comes with a ten year guarantee, so you know it’ll be a while before you have to even think about spending any more money on it. Other advantages include the range of colours available, and the range of manufacturers and finishes. The rendering can be scraped, scraped with Ashlar cuts, stone or textured.

Rendering for your commercial property needs…

Warwickshire-based Taylor Hart Ltd can offer you a wide range of rendering for commercial property options. Founded in 1998, the business offers a variety of services outside of rendering, including: partitions and dry linings, screeding, metal ceilings, structural stud, plastering, and passive fire protection. They work for clients in all sectors of industry all over the UK, priding themselves on their commitment to a project, their teamwork, and their high standards of service.

To find out more about rendering (or the other services mentioned above) contact Taylor Hart Ltd today. Their experts can advise you on the rendering for your commercial property options for your building, and will give you all of the information you need in order to make your decision.

We hope you’ve found this article on Taylor Hart, rendering contractors Birmingham useful. You might also like to read our previous blog on fire protection.

The post Rendering Contractors Birmingham for your Commercial Rendering appeared first on Taylor Hart Limited.